.jpg)
PRODUCT SPECIFICATIONS
Availability/Unavailability of product
It is very important that you understand that all the cushions that we feature in our cushion collection are manufactured according to customer order. We do our best to regularly update the Cushiono.com fabric collection, but the availability (or unavailability) of these products is ultimately determined by our suppliers. We, thus, do not warrant that all the fabrics found on our service will be available from the manufacturer. We will immediately notify you by e-mail if any fabric ordered by you is no longer available.Construction of cushion
Cushiono.com utilizes two different types of constructions in its cushion making.First, our boxed edge cushions have well-defined edges, and are constructed in such a way that the top and bottom fabric panels are held together by an additional band of fabric between the two panels. The thickness, length, and depth are measured seam to seam, with the boxed construction having a slight loft that adds between half and inch to one and a half inches to the thickness because of the fiber batting that is added to the polyurethane foam. Please see the cushion filling page for further information.
Our waterfall edge (or knife-edge) cushions, on the other hand, are constructed with the upper and lower fabric panels sewn directly to each other, thus creating a softer, smoother edge that looks like a waterfall when filled. Please note that the measurements for waterfall edge cushions from Cushiono need to begin at the center, and not on the edges. Also, note that the sides must be up by a straight edge for proper measurement.
Cushion filling
Our boxed construction cushions come with industry-standard medium-density closed-cell sheet Polyurethane Foam with Fiber Batting, made with a thin polyester foam wrapper that will add between half and inch to two inches of additional low-density loft to the polyurethane filled cushions. These cushions are perfect for ottomans, seats, benches, deep seating, and chairs.Waterfall construction bench cushions come with foams that are one inch thinner, but they do have enough fiber batting wrapped around to make up for the one inch. For waterfall construction made for ottomans, seats, deep seating, and chairs cushions however, we use a filling of polyester fiber fill. This polyester fiber fill is layered vertically and is heat-bonded. We ensure that it is free of any bonding agents.
Please note that we, as a matter of policy, do not use fibers that are resin-bonded because they break down easily and cause cushions to become filthy.
Also note that it is possible for your cushions to be delivered folded or squashed since they are soft products that may shift during shipping. You can easily remedy this issue by unfastening the product, realigning the foam and reshaping it with your hand. Where there is no zipper, all you have to do is to squeeze and smooth the foam out. Also, the welt and seams may need adjusting. Please see our welt segment for more information.
WARNING: We are a company that complies with the California Proposition 65 Warning stipulation. We therefore want to inform you that products containing foam can bring you into contact with Toluene diisocyanate as well as other chemicals which have been determined by the State of California to cause cancer.
